background image

  4 3  

|

  E N G

TROUBLESHOOTING

TRY THESE SOLUTIONS FIRST

If you experience problems with the soundbar:
•  Make sure the soundbar is connected to a live AC (mains) outlet.
•  Secure all cables and make sure all connections are correct.
•  Check the status lights (see page 31).
•  Move the soundbar 1 – 3 ft (0.3 – 0.9 m) away from  possible interference  (wireless 

routers, cordless phones, televisions, microwaves, etc.).

•  Move the soundbar within the recommended range of your  mobile device for  

proper operation.

•  Place the soundbar according to the placement guidelines (see page 13).
•  Unplug the power cord for at least 1 minute and reconnect.

OTHER SOLUTIONS

If you could not resolve your issue, see the table below to identify symptoms and 

 solutions to common problems. If you are unable to resolve your issue, contact  

Bose customer service. 

Visit: worldwide.Bose.com/contact

SYMPTOM

SOLUTION

Remote is  

inconsistent or 

doesn’t work

Check the battery to see if it’s installed properly or if it needs to be 

replaced (see page 41).
Point the remote directly at the soundbar.
Check that the status light blinks when you press the Volume up, 

Volume down, or Mute/Unmute buttons on the remote.
Unplug the power cord for at least 1 minute and reconnect.

Содержание Acoustic Wave Series II















































Отзывы: