Using the Headset
English - 19
Primary and secondary audio sources
The aircraft intercom system (ICS) is always the headset’s primary audio source.
When the headset is plugged in to the aircraft, intercom signals will always be
heard and cannot be muted by the headset.
In addition to the primary source (intercom), the headset can connect to secondary
audio sources.
Secondary sources can be either AUX (wired) or
Bluetooth
®
(
wireless).
Note:
Only one secondary source can be heard at a time. Audio from a secondary
source will never override intercom communications.
AUX audio sources (wired)
Use the 1/8 inch (3.5 mm) AUX audio input to connect your headset with an exter-
nal audio source such as a portable GPS or a portable audio device. The connector
is located at the bottom end of the control module as shown.
Use the supplied 1/8 inch (3.5 mm) adapter cable to connect your external audio
device. Plug one end of the adapter cable into the headphone plug on your device
and the opposite end into the headset AUX audio input.
AUX audio input
Note:
None of the functions of a connected AUX source are controlled by the
control module.
Note:
Audio from an AUX source will not be heard if the Secondary Audio Mode
selector is in the OFF position.
Bluetooth
®
audio sources (wireless)
If you purchased the
Bluetooth
control module version, you can wirelessly
connect your headset to an external audio source such as a smartphone or tablet.
Содержание A20 Aviation
Страница 1: ...Bose A20 Aviation Headset Owner s Guide ...
Страница 42: ......
Страница 43: ......
Страница 44: ... 2017 Bose Corporation The Mountain Framingham MA 01701 9168 USA AM746706 0020 Rev 00 ...