Information subject to change without notice
2
OF
2
What variants of the product are available?
The FS360P-II loudspeaker is available in one model for either 70V or 100V operation and comes in
one color, green. PC 031830
What is included in the box with the speaker?
The FS360P-II loudspeaker comes ready to mount in the ground or on a horizontal surface with an
instruction sheet and wire nuts for the wire terminations. The product requires three #10 or M4
mounting screws for mounting to a hard surface, which are not included.
What accessories are available?
No accessories are necessary for the FS360P-II loudspeaker.
How do I install the FS360P-II loudspeaker?
The FS360P-II loudspeaker may be buried in the ground in a hole up to 6.5 inches (16 cm) in depth.
All connections are made at the end of the cable exiting from the FS360P-II product. Connect the
designated wires to cable from your amp and – terminals, then protect the connections with the
included wire nuts. Twist the appropriate color wire for your desired tap setting with the tap common
wire, then use a wire nut to seal. Cap all unused remaining wires with the included wire nuts. The
wire junctions may be laid in the ground (the wire nuts have silicone for a seal), or installed
in a bury-rated junction box.
For surface applications such as on a deck or patio, the external cable and wire connections may be
placed under the product or placed in an external junction box. Secure the product to the surface with
three #10 or M4 mounting screws, which are not included.
Do I need active equalization with the FS360P-II loudspeaker?
No active equalization is necessary with the FS360P-II loudspeaker.
What tap settings are available on the FS360P-II loudspeaker?
80W, 40W, 20W, and 10W tap settings are available.
How do I change the tap settings?
At the end of the product cable, twist the appropriate color wire for your desired tap setting with the
tap common wire, then use a wire nut to seal. Cap all unused remaining wires with the included wire
nuts. The wire color designations for each wattage tap are listed in the product manual and on the
product label on the bottom of the loudspeaker.
FreeSpace
®
360P Series II Loudspeaker
