- 21 -
Bose Pow Configuration Utility User Guide
Note:
The
I-Share
toggle becomes available after the
Output Channel
is specified, and only if the
channel to be paired with the specified channel is available. The allowable channel pairings are
channels 1 and 2, or channels 3 and 4.
When you click the toggle to enable I-Share, the
Enable I-Share
dialog box appears in which you must
select one of the following options:
-
Full Power
to enable I-Share and go into Full Power mode.
-
Standby
to keep the amplifier in Standby Mode where configuration can continue. I-Share will be
enabled when the amplifier is turned on by the front panel power button or by disabling Standby
mode on the
Summary
page of the
Dashboard
tab.
Note:
If at any time you want to disable I-Share, when you click the toggle, the
Disable I-Share
dialog
box appears to inform you that the amplifier has to enter Standby mode to complete the process.
Click
Enter Standby
to proceed with disabling I-Share or click
Cancel
to keep I-Share enabled.
l
Output Channel:
Select the physical output channel for the selected output from the drop-down list.
l
Speaker EQ:
Allows you to select from among the following loudspeaker EQs for the selected output:
- Flat EQ settings
- Custom EQ settings
- Bose®loudspeakers, which include preconfigured equalization settings (presets).
l
HI Z / Low Z:
Click the toggle to select either high impedance (Hi Z) or low impedance (Low Z).
Note:
If you select
Hi Z
, you can specify the constant voltage mode as 70V or 100V under
on the
Amplifier
page of the
Settings
tab.
l
Delay:
Allows you to set the signal delay time by first specifying a number using the up and
down arrows or typing directly in the text box, and then selecting the measurement type from
the drop-down list. Measurement types include milliseconds (msec), meters, and feet.
l
Polarity:
Allows you to change the polarity of the signal to positive (+) or negative (-), which are also
referred to as non-inverted and inverted, respectively. Polarity is positive (+) by default.
l
Mute:
Click the
Mute
icon to enable or disable muting for the output channel.
l
Active Output
meter: Displays the current output signal level as a Vpeak measurement with a
range of 0 to 160.
Note:
When I-Share is enabled, the Active Output meter displays two amplifier channels for the
selected output.
l
Gain (dB)
adjuster: Allows you to adjust the output signal level delivered to the next gain stage. The
range of adjustment is from –60 to +12 dB.
Note:
You can use the slider, the up and down arrows, or type directly in the text box to adjust the
gain.
