- 18 -
Bose Pow Configuration Utility User Guide
Configuration: Inputs
The
Inputs
page allows you to add, remove, and configure inputs (sources). Each input can be named
for easy identification and inputs can be configured independently of one another.
Note:
Pow amplifiers allow a maximum of four inputs.
Input Setup
The
Input Setup
area lists any existing inputs and allows you to add a new input, edit the name of an
input, or delete an input.
To add an input:
l
Under
Input Setup
, click
Add
, and then edit the input name (described below).
Note:
The
Add
button becomes unavailable after the maximum number of inputs is reached.
To edit the name of an input:
1. Under
Input Setup
, in the text box that contains the input name that you want to edit, click
Edit
.
Note:
The
Edit
icon appears when you hover over the text box.
2. Type a new name for the input and then press Enter.
To delete an input:
1. Under
Input Setup
, in the text box that contains the name of the input that you want to delete,
click
Delete
.
Note:
The
Delete
icon appears when you hover over the text box, and only when at least two
inputs exist.
2. In the
Warning
dialog box, click
Yes
to remove the input, or click
No
to cancel the process.
Details
The
Details
section of the
Inputs
page allows you to configure certain settings for the selected input.
Settings vary depending upon the input type.
To configure details for an input:
Under
Input Setup
(at the top of the page), click the name of the input you want to configure, if
it is not already selected.
Note:
When selected, the input name box appears as white text on a black background.
You can then configure the following settings as applicable:
l
Stereo:
You can configure input channels as stereo pairs by selecting the
Stereo
check box.
This allows you to assign a pair of adjacent input channels by selecting the pair (channels 1 and 2,
or channels 3 and 4) from the
Input Channel
drop-down list. Clear the
Stereo
check box if you
want to configure the input as mono.
Notes:
l
The
Stereo
check box becomes available only after you assign a channel and an appropriate
input type, and if the adjacent channel to be paired is currently unassigned.
l
Stereo can only be enabled on Euroblock input types. The
Stereo
check box is not available for
RCA and paging input types.
l
When the
Stereo
check box is enabled, the
Input Channel
drop-down list contains pairs of
adjacent input channels and the first available pair is automatically assigned. You can choose
