Bosch XQG100-WDU285H80W, Руководство пользователя и инструкции по установке

Страница: 20 / 56

en
first time
20
1 2
first time
6 Before using for the
first time
first time
Prepare the appliance for use.
6.1 Starting an empty wash-
ing cycle
Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
1.
Press .
The switch-on process takes a few
seconds.
2.
Set the
筒洗烘
programme.
3.
Close the door.
4.
Pull out the detergent drawer.
5.
Pour standard washing powder
into compartment II.
To prevent foaming, use only half
of the amount of detergent recom-
mended by the detergent manufac-
turer for light soiling. Do not use
detergent suitable for woollens or
delicates.
6.
Push in the detergent drawer.
7.
Press to start the programme.
a The display shows the remaining
programme duration.
a
After the programme has ended,
the display shows: End.
8.
Start the first wash cycle or press
to switch off the appliance.
→ "Basic operation", Page 31