en
Selecting additional functions
26
\
Selecting additional
functions
Selecting additional functions
Select the desired additional option with
the
¬
(
Option
) button, hold this button
until your desired option frame flashes
and then activate the chosen option by
touching the
²
(
Select
) button. The
selection bar appears at the bottom of
the frame, indicating that the option is
selected. Touch the
²
(
Select
) button
again to deactivate this option. You can
repeat this operation to select more
additional options which are available
for the selected programme. If there is
no other action, option frame stops
flashing and comes on after several
seconds. The additional option is
sucessfully selected .
SpeedPerfect
G
(
: For a shorter wash time with a
comparable washing effect to the
standard programme.
Note:
Do not exceed maximum load.
Overview of programmes
EcoPerfect
F
0
: Energy-optimised washing by
reducing the temperature while
achieving a consistent washing result.
Note:
The washing temperature is
lower than the selected temperature.
For special hygiene requirements, the
;
programme is
recommended.
Rinse plus
à
8
: Additional rinse cycle. For areas
with very soft water or for an even better
rinsing result.
Stains
@
: The
Stains
additional function for
treating special stains can be selected.
A total of 6 different stains can be
selected. The washer dryer adjusts the
washing temperature, drum movement
and soaking time specifically to the type
of stain. Hot or cold water, gentle or
intensive washing control and long or
short soaking provide the wash
programme with a special sequence for
each type of stain. The result: the best
treatment for each stain.
#
