Bosch WUU28T63ES, Руководство пользователя и инструкции по установке

Страница: 37 / 52

Cleaning and servicing
en
37
Cleaning the drain pump
Requirement:
The drain pump is
empty. → Page 35
1.
Since water may remain in the
drain pump, unscrew the pump
cap carefully.
‒
The filter insert in the pump
housing may become stuck due
to coarse particles of dirt.
Loosen the dirt and remove the
filter insert.
2.
Clean the interior, the thread on
the pump cap and the pump hous-
ing.
The pump cap is comprised of two
parts which can be taken apart for
cleaning.
3.
Ensure that the impeller in the
drain pump can rotate.
4.
Insert the pump cap.
‒
Ensure that the parts of the
pump cap are correctly as-
sembled.
5.
Screw the pump cap as far as it
will go.
90°
The handle on the pump cap must
be in a vertical position.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run a suitable programme
for draining after you have emptied
the drain pump.
1.
Open the water tap.
2.
Insert the mains plug.
3.
Switch on the appliance.
4.
Pour 1 litre of water into compart-
ment II.
5.
Select a suitable programme for
draining.
→
"Programmes", Page 24