operation
en
31
2.
Slide the measuring aid forwards.
3.
Fold the measuring aid down and
click it into place.
4.
Push in the detergent drawer.
13.7 Adding detergent and
care product
Notes
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡
Observe the information about de-
tergents and care products
→
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.8 Starting the programme
Requirement:
A programme has
been set.
→
"Setting a programme", Page 29
▶
Press
Inicio/Pausa + Carga
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.The display shows either the
programme duration or the "Ready
in" time.
a
After the programme has ended,
the display shows:
End
.
13.9 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡
The programme is set.
→
"Setting a programme", Page 29
¡
The "Ready in" time is set and ac-
tivated.
→
1.
Press
Inicio/Pausa + Carga
.
The activated "Ready in" time is
paused.
2.
Press
Termin.
repeatedly until
the display indicates the desired
"Ready in" time.
3.
Press
Inicio/Pausa + Carga
.
The changed "Ready in" time is ac-
tivated.
Содержание WUU24T63ES
Страница 22: ...en Display 22 display Designation More information E 35 10 1 Error Error code error display signal 1 Example ...
Страница 53: ......
Страница 54: ......
Страница 55: ......