Bosch WTX80KL9SN, Руководство пользователя

Страница: 49 / 60

Troubleshooting
en
49
Fault Cause and troubleshooting
⁠ and programme
terminated.
Foreign object is located in the base unit
1.
→ "Opening the base unit", Page 43 .
2.
Remove the foreign objects that are present.
3.
→ "Closing the base unit", Page 43 .
Dirt in the appliance.
▶
→ "Preparing the appliance for the intensive appli-
ance care programme", Page 39 .
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted. The appliance uses condensation for the automatic
self-cleaning.
▶
Not a fault – no action required.
Water drain hose is not connected correctly.
▶
Ensure that the water drain hose is connected cor-
rectly.
→
"Connecting the water drain hose", Page 14
The programme does
not start. Childproof lock is activated.
▶
→ "Deactivating the childproof lock", Page 32
You have not pressed ⁠ .
▶
Press ⁠ .
No programme set.
1.
→ "Setting a programme", Page 28 .
2.
→ "Starting the programme", Page 29 .
The length of the pro-
gramme changes dur-
ing the drying cycle. The programme operation is optimised electronically.
This may change the programme duration.
▶
Not a fault – no action required.
Pumping noise. Condensation pump active.
▶
Not a fault – normal operating noise.
Buzzing noise. Compressor ventilation active.
▶
Not a fault – normal operating noise.
The drying time is too
long. The base unit's filter is soiled.
▶
→ "Cleaning the filter system on the base unit",
Page 29
The ambient temperature is greater than 30 °C.
▶
Ensure that the ambient temperature is lower than
30 °C.
The ambient temperature is lower than 15 °C.
▶
Ensure that the ambient temperature is above 15
°C.
Insufficient air circulation at the appliance's installation
location.