Home Connect
en
35
3.
Turn the programme selector to
position 5.
§“à
(reset network settings) will
appear on the display.
4.
Press (Start/Pause)
A
.
¢“à
(yes) will appear on the display.
5.
Press (Start/Pause)
A
to confirm.
“Ÿš
(end) will appear on the
display.The network settings have now
been reset. Your appliance is no longer
connected to your home network or the
Home Connect app.
6.
Press
(Remote Start)
}
briefly to
exit the Home Connect settings.
Notes
■
If the network settings could not be
reset,
“§§
(fault) will appear on the
display.
■
If you want to operate the appliance
via the Home Connect app again,
you will need to reconnect it to your
home network and to the
Home Connect app either
automatically or manually.
Updating the software
You can update the Home Connect
software on your appliance.Whenever a
new update is available,
—˜š
(update)
will appear on the display.
You can install the update directly via
the message on the display or,
alternatively, via the appliance settings.
1.
Switch on the appliance.
2.
Press and hold
(Remote Start)
}
for
at least 3 seconds.
‘ž£
(connect automatically) will
appear on the display.
3.
Turn the programme selector to
position 6.
—˜š
(update) will appear on the
display.
(Start/Pause)
A
will flash if a software
update is available.
4.
Press (Start/Pause)
A
.
¢“à
(yes) will appear on the display.
5.
Press (Start/Pause)
A
to confirm.
Update installation will now start. This
process may take several minutes. Do
not switch the appliance off while
updates are being installed.
6.
Press
(Remote Start)
}
briefly to
exit the Home Connect settings.
