Bosch WTR85VL7SN Скачать руководство пользователя

Страница: 28 / 44

Operating the appliance

Open the door or press

(Start/

Pause) to pause the programme.

Note:

The drum will continue to

rotate when the CoolDown process

is in progress, even if you have

paused the programme. You can

stop the CoolDown process at any

time by opening the door.

Add or remove laundry.

If required, select a different

programme or a different

programme setting.

"Overview of

programmes" on page 22

"Programme settings"

on page 24

Note:

Do not change the

programme during the CoolDown

process.

Close the door.

Press

(Start/Pause).

Note:

The programme duration is

updated on the display, depending on

the load and on the residual moisture in

the laundry. The values displayed may

change when the programme or load is

changed.

Cancelling the programme

The programme can be cancelled at

any time by opening the door or

pressing

(Start/Pause).

Caution!

Risk of fire. Laundry may catch fire.

If you cancel the programme, remove all

items of laundry from the dryer and

spread them out to allow the heat to

dissipate.

Programme end

The following message appears in the

display:

“Ÿš

Removing laundry and

switching off the appliance

Remove the laundry.

Turn the programme selector to

switch off the appliance.

Emptying the condensation

container

Note:

After each drying cycle, empty

the condensate container; otherwise

the next drying programme may be

cancelled as a result of the condensate

container being full.

Содержание WTR85VL7SN













































Результаты поиска

Содержание WTR85VL7SN

Отзывы:

Похожие инструкции для WTR85VL7SN

Бренды по названию

Популярные бренды

Bosch WTR85VL7SN, Инструкция по установке и эксплуатации

Результаты поиска

Содержание WTR85VL7SN

Отзывы:

Похожие инструкции для WTR85VL7SN

Бренды по названию

Популярные бренды