en
Programme settings
24
0
Programme settings
Programme settings
--------
Program setting
Function
Note:
Not all settings can be activated in every programme. The activated settings are displayed on the pro-
gramme selector (dryness level) or highlighted brightly in the display. You can change or deactivate the ac-
tivated settings by turning the programme selector or pressing the relevant buttons repeatedly.
Drying target
:
The dryness level defines how damp or dry the laundry is after the programme
ends.
Use the programme selector to select the dryness level that you require for the
laundry you need to dry.
Cupboard-dry extra
Multi-layered, thick laundry that does not dry readily.
Cupboard-dry
Normal, single-layered laundry.
Iron-dry
Normal, single-layered laundry that still needs to be damp after drying and is suit-
able for ironing or hanging up.
ô
(Adjust drying level)
If you think the laundry is still too damp when the drying programme has ended,
you can adjust the degree of dryness to achieve a particular dryness level. To
increase the dryness level, set the degree of dryness to between
–
and
•
. This
extends the programme duration but the temperature remains the same.
Once you have adjusted the degree of dryness for a dryness level, this setting is
retained even after the appliance is switched off.
5
(Time Dry)
The drying time for
timed programmes
can be extended to up to three hours in
10-minute increments.
ñ
(Ready in)
Before starting the programme
, you can delay the time at which the pro-
gramme ends by up to 24 hours.
The set time in hours, e.g. 8 h, is shown in the display and counts down until the
programme starts. Once the programme has started, the programme duration is
displayed.
Note:
The programme duration is included in the "Ready in" time.
Q
(Anti-Crease)
The drum moves the laundry at regular intervals after drying to prevent creasing.
You can extend the automatic Anti-Crease function by 60 minutes (
”
).
s
(Low heat)
Reduced temperature for delicate fabrics, e.g. polyacrylic or elastane, may
increase the drying time.
