en
Installation and connection
14
Requirements
¡
The appliance and the accessory
have been unpacked.
→
¡
The appliance is installed at the in-
stallation location.
→
"Requirements for the installa-
1.
Pull out the condensation hose
from the connecting piece.
The condensation hose is connec-
ted to the connecting piece at the
factory.
Note:
When removing the con-
densation hose, liquid may leak
out of the connecting piece.
2.
Push the condensation hose into
the holder.
3.
Push the water drain hose as far
as it will go into the connecting
piece.
4.
Empty the condensation container
→
5.
Remove the stopper on the under-
side.
