Faults and what to do about them
en
45
Faults and what to do about them
The symbol
Û
flashes
Run the
Cottons
i
90°C
programme to clean and care for the drum and the
outer tub.
Notes
■
Run the programme without laundry.
■
Use washing powder or a detergent containing bleach. To prevent foaming,
only use half the amount of detergent recommended by the detergent manu-
facturer. Do not use detergent designed for woollens or delicates.
■
Switching the drum care information signal on/off.
E:36
alternating with
-10
and
End
when programme is
finished
■
The drain pump is blocked.
"Drain pump is blocked" on page 41
■
The drain hose at the siphon is blocked.
"The drain hose at the siphon is blocked" on page 42
E:35
alternating with
-10
and
End
when programme is
finished (Suitable for
special models)
There is water in the base trough, the appliance is leaking. Turn off the tap. Call
customer services.
H:95
alternating with
End
when programme is
finished
No water detected in drying phase, may get bad drying result.
H:32
alternating with
End
when programme is
finished
Unbalance problem, spinning phase is aborted.
Other displays
Turn the programme selector to
Off
, wait for five seconds and then switch it on
again. If the display appears again, call customer services.
Faults
Cause/Remedy
Water is leaking from the
appliance.
■
Attach the drain hose correctly or replace it.
■
Tighten the screw fitting on the supply hose.
The door cannot be
opened.
■
The temperature in drum is too high to open the door.
■
The safety function is activated. Stop the programme?
■
The water level in drum is too high.
■
Can the door only be opened by the emergency release?
"Emergency release" on page 43
Display
Cause/Remedy
