Bosch WNA14400IN Скачать руководство пользователя страница 47

Страница: 47 / 52

Faults and what to do about them

Water is not visible in the

drum.

Not a fault – the water is below the visible area.

The wrong detergent/fab-

ric softener has been

poured into the dis-

penser(s).

Empty the dispenser(s), clean it/them and pour in the correct product.

"Emptying the detergent draw, cleaning the detergent drawer and its hous-

ing" on page 41

"Dosing and adding detergent and care products" on page 37

Detergent/fabric softener

has congealed in the dis-

pensers.

Empty the dispenser(s), clean it/them and pour in the correct product.

"Emptying the detergent draw, cleaning the detergent drawer and its hous-

ing" on page 41

"Dosing and adding detergent and care products" on page 37

Status display

is on.

Foam is leaking from the

detergent drawer.

Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour into

dispenser

. (Not for outdoor, sports and down-filled textiles!)

Reduce detergent dosage for the next wash cycle.
Use commercially available low foam detergent and care product which are

suitable for machine.

Repeated, intensive foam-

ing.

Have you used too much detergent? Add less detergent in the next time you

run a wash cycle with the same load.

Detergent/fabric softener

drips off the seal and col-

lects on the door or in the

seal fold.

There is too much detergent/fabric softener in the dispensers. Do not fill the

dispensers above the

max.

mark.

The spin result is not sat-

isfactory.
Laundry wet/too damp.

■

Not a fault – the unbalanced load detection system has interrupted the

spin cycle because the laundry is unevenly distributed. Distribute small and

large items of laundry evenly in the drum.

■

Easy iron

additional programme setting selected (depending on the

model)?

■

Silent wash

additional programme setting or

Silent wash

programme

selected (depending on the model)?

■

Is the selected speed too low?

The spin cycle runs sev-

eral times.

Not a fault – the unbalanced load detection system is adjusting an imbalance.

The programme is taking

longer than usual.

■

Not a fault – the unbalanced load detection system is adjusting an imbal-

ance by repeatedly distributing the laundry.

■

Not a fault – the foam detection system is activated – a rinse cycle has

been switched on.

The length of the pro-

gramme changes during

the wash cycle.

Not a fault – the programme sequence is optimised for the specific washing

process. This may change the length of the programme shown on the display

panel.

Faults

Cause/Remedy

Содержание WNA14400IN





















































Результаты поиска

Содержание WNA14400IN

Отзывы:

Похожие инструкции для WNA14400IN

Бренды по названию

Популярные бренды

Bosch WNA14400IN, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WNA14400IN

Отзывы:

Похожие инструкции для WNA14400IN

Бренды по названию

Популярные бренды