Bosch WN44A2X0HK Скачать руководство пользователя

Страница: 14 / 52

Positioning and connecting

■

If the hose and mains cables are not

routed properly, there is a risk of

tripping and injury.

Lay hoses and cables in such a way

that there is no risk of tripping.

Caution!

Damage to the appliance

Frozen hoses may rip/burst.

Do not install the appliance in areas

exposed to frost or outdoors.

Caution!

Water damage

The connection points for the water

supply hose and water drain hose are

under high water pressure. To prevent

leaks and water damage, you must

follow the instructions in this section.

Notes

■

In addition to the safety information

listed here, the local water and

electricity supplier may have special

requirements.

■

If in doubt, have the appliance

connected by a specialist.

Installation surface

Note:

The appliance must be stable

aligned so that it does not move

around.

■

The installation surface must be firm

and level.

■

Soft floors/floor coverings are not

suitable.

Installation on a base or a

wooden joist floor

Caution!

Damage to the appliance

The appliance may "wander" and tip/

topple from the base when spinning.

The feet of the appliance must be

secured with holding brackets.

Order no. WMZ 2200, WX 975600,

CZ 110600, Z 7080X0.

Note:

On wooden joist floors, install the

appliance:

■

In a corner, if possible,

■

On a water-resistant wooden board

(min. 30 mm thick) which is screwed

tightly to the floor.

Installing the appliance in a

kitchenette

Warning

Risk of death!

There is a risk of electric shock if you

touch live components.

Do not remove the appliance covering

plate.

Notes

■

Recess width of 60 cm required.

■

Only install the appliance

underneath a continuous worktop

that is securely connected to

adjacent cabinets.

Removing the transport locks

Caution!

Damage to the appliance

■

The appliance is secured for

transportation using transport locks.

If the transport locks are not

removed, the appliance may

become damaged when it is

operated.

Before using the appliance for the

first time, make sure that you

completely remove all four transport

locks. Keep the locks in a safe

place.

■

To prevent transport damage from

occurring if the appliance is moved

at a later date, you must refit the

transport locks before transporting

the appliance.

Содержание WN44A2X0HK





















































Результаты поиска

Содержание WN44A2X0HK

Отзывы:

Похожие инструкции для WN44A2X0HK

Бренды по названию

Популярные бренды

Bosch WN44A2X0HK, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WN44A2X0HK

Отзывы:

Похожие инструкции для WN44A2X0HK

Бренды по названию

Популярные бренды