en
Setting the signal
38
M
Setting the signal
Setting the signal
You can change the following settings:
■
The volume for the information
signals (e.g. at the end of the
program) and/or
■
The volume of the audible button
signals.
You will need to activate the setting
mode in order to change these settings.
Activate setting mode:
1.
Set the program selector to
position 1. The washing machine is
switched on.
2.
Press the Start/Reload button and,
at the same time, turn the program
selector clockwise to position
2.Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel
(e.g. at the end of the program).
Changing the volume
Use the
û
Finish in
button to change
the following settings at the
corresponding program selector
positions:
■
2: The volume of the information
signals and/or
■
3: The volume of the button signals.
Exiting setting mode
You can now end the process and set
the program selector to the
Off
position.
The settings are saved.
H
Sensors
Sensors
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note:
Place large and small items of
laundry evenly in the drum.
1/2/3/...
positions on the program
selector
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
