13
Washing options
Skin Care (water plus):
button
Increased water level during the washing and rinsing cycle. For areas
with very soft water or to further improve the washing result.
The lamp lights up if
Skin Care
(water plus) was selected.
s
(temperature) button
The temperature can be individually adjusted for each programme.
To set the temperature, press the
s
(temperature)
repeatedly until the
required temperature is displayed.
B
(Spin) button
The spin speed can be individually adjusted for each programme.
To set the spin speed, press the
B
(Spin) button repeatedly until the
required spin speed is displayed.
If Rinse stop is desired, the spin speed is reduced to 0 rpm. The laundry
remains in the last rinsing water. Appropriate for delicate fabrics and
curtains
page 14.
The automatic unbalanced load detection system ensures even distribu-
tion of the laundry by starting to spin several times. If the laundry is
extremely unevenly distributed, the speed of the final spin is reduced or
the spin cycle is not performed for safety reasons.
3
(Delay) button
You can delay the start of the programme before it begins. Using the re-
maining time, you can determine when the selected programme is to end.
The remaining time can be set in increments of one hour up to a maxi-
mum of 24 hours.
Press the
3
(Delay) button repeatedly until the required number of hours
is displayed.
Then press the
Inicio/ Pausa
(Start/Pause)
button; the start of the pro-
gramme is delayed according to the remaining time set. The time remain-
ing until the end of the programme is shown in the display panel.
Inicio/ Pausa
(Start/Pause)
button
Press
Inicio/ Pausa
(Start/Pause) to start the selected programme.
The programme progress is shown using illuminated indicator lamps:
preparado (Ready)
lavar (Wash)
– After switching on the washing machine, the lavar (
Wash)
(Ready) indi-
cator lamp flashes.
– When the programme starts, lavar (
Wash)
lights up permanently.
aclar./enx. (Rinse)
– Lamp lights up permanently during the rinsing cycle.
– Rinse stop selected: all indicator lamps are switched off.
centrifugar (Spin)
– Lights are on permanently during the spin cycle.
– When spinning finishes, centrifugar (Spin) (End) flashes.
terminado (End)
–
“Ÿš
appears in the display panel.
Rinsestop
Unbalanced load detection
system
Programme progress
