NL Troubleshooting
Malfunction
"E:36 / -10"
Cause and Troubleshooting
▶
Remove any unauthorized extensions from the
water drain hose. Connect device
Pump cover is not fully screwed in.
▶
Make sure that the pump cover is screwed into the
device as far as it will go. The pump cover handle
must be vertical.
"E:36 / -25 / -26"
Drain pump is clogged.
▶
"Cleaning the drain pump", page 35
"E:38 / -25 / -26"
Drain pump is clogged.
▶
if the error is displayed again,
▶
"Cleaning the drain pump", page 35
Inlet opening of the rubber sleeve is clogged.
▶
"Clean the inlet opening in the rubber sleeve",
Water pressure is low.
No solution possible.
The strainers in the water supply are clogged.
▶
Clean the strainers in the water supply.
Water tap is closed.
▶
Open the water tap.
Water supply hose is kinked or pinched.
▶
Make sure that the water supply hose is not
kinked or pinched.
burns.
Temperature is too high.
▶
Wait for the temperature to drop.
▶
Water level is too high.
▶
Start the program pump down.
Laundry is wedged in the door.
1.
Open the door again.
2.
Remove trapped laundry.
3.
Close the door.
4.
To start the program, press Start/Refill.
flashes.
Door is not closed.
1.
Close the door.
2.
To start the program, press Start/Refill.
40
Содержание WGG244MPFG
Страница 23: ...Display NL Indication E 35 10 1 1 Example name Wrong More information Error code error indication signal 23 ...
Страница 53: ......
Страница 54: ......
Страница 55: ......