NLService
3.
Fold the dosing aid downwards and
click into place.
aThe display shows whether the program
maduur or the ready in time
displayed.
aAfter the program end, it shows
display: "End" .
13.9 Soaking laundry
Remark:No additional detergent is
needed. The soapy water is then used
for washing.
1.
Start the program.
2.
To pause the program, after about
10 minutes, pressStart/ Refill
†
4.
Slide in the detergent drawer.
13.7 Dosing detergent and care
agent
3.
To resume the program after the
desired soaking time, press Start/
Reload
†
Comments
†Use the dosing aid for liquid
Do not use gel-like detergents,
washing powder, switched on
prewash or ready-in time. †Keep the
directions for washing
13.10 Adding laundry
1.
PressStart/Reload The
device pauses.
†
Remark:When
appears, it is not possible to
add laundry.
far-
1.
Pull out the detergent drawer.
When goes out, it is possible to
add laundry.
2.
Fill with detergent.
2.
Open the appliance door.
3.
Reload or remove the laundry.
4.
Close the appliance door.
5.
PressStart/Reload
†
3.
If desired, fill with a care product.
4.
Slide the detergent drawer into the
appliance.
13.11 Program Cancel
13.8 Starting the program
1.
onStart/Reload
to press.
2.
Open the appliance door.
Remark:If you want to change the time
until the program end, first set the
ready in time.
At high temperature and high
water level, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperatureTo rinse .
▶
onStart/Reload
to press.
aThe drum rotates
load recognition
up to 2 minutes k
after that it flows
ready.
and find a
g place, which
an last and
water in the app
32
