English |
17
Bosch Power Tools
2 609 003 546 | (18.11.10)
f
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can
lead to explosion. Penetrating a water line
causes property damage or may cause an
electric shock.
f
Switch off the power tool immediately
when the tool insert jams. Be prepared for
high reaction torque that can cause kick-
back.
The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
f
Secure the workpiece.
A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
f
Keep your workplace clean.
Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
f
Always wait until the machine has come to
a complete stop before placing it down.
The
tool insert can jam and lead to loss of control
over the power tool.
f
Before any work on the machine (e. g.,
maintenance, tool change, etc.) as well as
during transport and storage, set the rota-
tional direction switch to the centre posi-
tion.
Unintentional actuation of the On/Off
switch can lead to injuries.
Protect the power tool against heat,
e. g., against continuous intense sun-
light, fire, water, and moisture.
Dan-
ger of explosion.
f
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints.
The vapours can irritate the
respiratory system.
Safety Warnings for battery chargers
Keep the battery charger away from
rain or moisture.
Penetration of water
in the battery charger increases the
risk of an electric shock.
f
Do not charge other batteries.
The battery
charger is suitable only for charging Bosch
lithium ion batteries within the listed voltage
range. Otherwise there is danger of fire and
explosion.
f
Keep the battery charger clean.
Contamina-
tion can lead to danger of an electric shock.
f
Before each use, check the battery charger,
cable and plug. If damage is detected, do
not use the battery charger. Never open the
battery charger yourself. Have repairs per-
formed only by a qualified technician and
only using original spare parts.
Damaged
battery chargers, cables and plugs increase
the risk of an electric shock.
f
Do not operate the battery charger on easi-
ly inflammable surfaces (e. g., paper, tex-
tiles, etc.) or surroundings.
The heating of
the battery charger during the charging proc-
ess can pose a fire hazard.
f
Children should be supervised to ensure
that they do not play with the battery charg-
er.
Products sold in
GB only
: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Functional Description
Read all safety warnings and all in-
structions.
Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
OBJ_BUCH-605-004.book Page 17 Thursday, November 18, 2010 2:35 PM
