en
Troubleshooting
60
Errors
Cause
Troubleshooting
Heavy foam build-up
Detergent dosage is too high.
▶
Immediate measure: Mix one table-
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the compartment for manual dos-
ing (not for outdoor clothing,
sportswear or items stuffed with
down).
▶
If intelligent dosing is activated, re-
duce the basic dosage
▶
If you dose manually, reduce the
amount of detergent for the next
washing cycle with the same load.
i-DOS
i-DOS
can-
not be actuated.
Intelligent dosing is not inten-
ded for this programme.
▶
Not a fault – no action required.
Programme progress does
not allow intelligent dosing.
No remedial action possible.
Noise
Errors
Cause
Troubleshooting
Rushing, hissing noise.
Water is flushed under pres-
sure into the detergent
drawer.
▶
Not a fault – normal operating noise.
Longer, whirring noise before
the start of the wash cycle or
fabric softening.
Intelligent dosing system dis-
penses detergent or care
products.
▶
Not a fault – normal operating noise.
Brief whirring noise after
switching on the appliance.
Intelligent dosing system car-
ries out a function test.
▶
Not a fault – normal operating noise.
Loud noises during the spin
cycle.
Appliance is not correctly
aligned.
▶
"Aligning the appliance", Page 17
The appliance feet are not
fixed.
▶
Secure the appliance feet.
"Aligning the appliance", Page 17
Transit bolts have not been re-
moved.
▶
Banging noises, rattling in the
drain pump.
Foreign bodies have got into
the drain pump.
▶
Slurping, rhythmical suction
noise.
The drain pump is active, the
detergent solution is pumped
out.
▶
Not a fault – normal operating noise.
Содержание WAX32KH0BY
Страница 18: ...en Installation and connection 18 In doing so hold the foot tight and do not adjust its height ...
Страница 54: ...en Cleaning and servicing 54 3 Connect the water inlet hose and check for leaks ...
Страница 70: ......
Страница 71: ......