Bosch WAX32GH1GB, Руководство пользователя и инструкции по установке

Страница: 59 / 68

Troubleshooting en
59
Errors Cause Troubleshooting
The programme duration
changes during the wash
cycle.
The unbalanced load detec-
tion system eliminates an im-
balance by repeatedly redis-
tributing the laundry.
▶ Not a fault – no action required.
Note: When loading, where possible,
place large and small items of laundry to-
gether in the drum. Different sized items
of laundry distribute themselves better
during the spin cycle.
Foam detection system
switches on a rinse cycle if
foam build-up is too high.
▶ Not a fault – no action required.
No water is visible in the
drum.
Water is below the visible
area.
▶ Not a fault – no action required.
Drum jerks after the pro-
gramme starts.
This is caused by an internal
motor test.
▶ Not a fault – no action required.
Residual water is present in
the compartment ⁠.
Insert in compartment is
blocked.
▶ → "Cleaning the detergent drawer",
Page 50
Vibrations and movement of
the appliance whilst spinning.
Appliance is not correctly
aligned.
▶
→
"Aligning the appliance", Page 17
The appliance feet are not
fixed.
▶ Secure the appliance feet.
→ "Aligning the appliance", Page 17
Transit bolts have not been re-
moved.
▶
→
"Removing the transit bolts",
Page 14
Drum does not turn, water
does not flow in.
Load detection is active. ▶ Not a fault – no action required.
Note: The load detection can take up to
two minutes.
Heavy foam build-up Detergent dosage is too high. ▶ Immediate measure: Mix one table-
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the left-hand compartment (not
for outdoor clothing, sportswear or
items stuffed with down).
▶ Reduce the amount of detergent for
the next washing cycle with the same
load.
Noise
Errors Cause Troubleshooting
Rushing, hissing noise. Water is flushed under pres-
sure into the detergent
drawer.
▶ Not a fault – normal operating noise.