Bosch WAX32GH1GB, Руководство пользователя и инструкции по установке

Страница: 53 / 68

Cleaning and servicing en
53
5.
Screw on the pump cap.
90°
The handle on the pump cap must
be in a vertical position.
6.
Insert the maintenance flap and lock
it into place.
1
2
7.
Close the maintenance flap.
Before the next wash
To prevent unused detergent from flow-
ing straight into the outlet in the next
wash, run the Drain programme after
you have emptied the drain pump.
1.
Turn on the tap.
2.
Insert the mains plug.
3.
Switch on the appliance.
4.
Pour 1 litre of water into compart-
ment II.
5.
Start the Drain programme.
Cleaning the water outlet
hose at the siphon
If the water outlet hose at the siphon is
dirty or the detergent solution is not be-
ing pumped out, you must clean these.
1.
Switch off the appliance.
2.
Disconnect the appliance's mains
plug from the power supply.
3.
Loosen the hose clamp and carefully
remove the water outlet hose.
Residual water may leak out.
4.
Clean the water outlet hose and si-
phon connecting piece.
5.
Reattach the water outlet hose and
secure the connection point using
the hose clamp.