Bosch WAV28MH9GB, Руководство пользователя и инструкции по установке

Страница: 53 / 68

Troubleshooting
en
53
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting in-
formation before contacting Customer Service. This will avoid unnecessary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the manu-
facturer, the manufacturer's Customer Service or a similarly qualified person in
order to prevent any risk.
Error code / Fault display / Signal
Errors Cause Troubleshooting
The display goes out and
Start / Reload flashes.
Energy-saving mode is active
▶
Press any button.
a The symbol lights up again.
"E:30 / -80" Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.
Drain pipe or water drain hose
is caught or jammed.
▶
Ensure that the drain pipe and water
drain hose are not kinked or trapped.
Drain pump is blocked.
▶
→ "Cleaning the drain pump",
Page 47
The water outlet hose is con-
nected too high.
▶
Install the water outlet hose at a max-
imum height of 1 metre.
→
"Technical specifications",
Page 64
"E:36 / -25 / -26" Drain pump is blocked.
▶
→
"Cleaning the drain pump",
Page 47
"E:60 / -2B" The unbalanced load detec-
tion system has interrupted
the spin cycle because the
laundry is unevenly distrib-
uted.
▶
Redistribute the laundry in the drum.
Note: Where possible, mix large and
small items in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
⁠
The water pressure is low. No remedial action possible.
The filters in the water inflow
are blocked.
▶
Clean the filters in the water inflow
→
Page 50 .
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is kinked
or jammed.
▶
Ensure that the water inlet hose is not
kinked or jammed.