![Bosch WAV28MH9GB Скачать руководство пользователя страница 42](http://html.mh-extra.com/html/bosch/wav28mh9gb/wav28mh9gb_user-manual-and-installation-instructions_52325042.webp)
en
Home Connect
42
Deactivating Wi-Fi on the ap-
pliance
1.
Press and hold
Remote Start
for
at least three seconds.
2.
Set the programme to position 4.
→
"Overview of Home Connect set-
a
The display shows
Con
.
3.
Press
Start / Reload
repeatedly
until the display shows
OFF
.
a
Wi-Fi is deactivated.
Note:
If Wi-Fi is switched off and your
appliance was previously connected to
your home network, this connection will
be re-established automatically when
Wi-Fi is switched back on.
Resetting the appliance net-
work settings
1.
Press and hold
Remote Start
for
at least 3 seconds.
2.
Set the programme to position 5.
→
"Overview of Home Connect set-
a
The display shows
rES
.
3.
Press
Start / Reload
.
a
The display shows
YES
.
4.
Press
Start / Reload
.
a
The network settings are reset.
a
If
End
is shown on the display, the
network settings are reset.
Tip:
If you wish to operate your appli-
ance again via the Home Connect app,
you will need to reconnect it to the Wi-
Fi and to the Home Connect app.
Software update
Requirement:
The display shows Upd.
1.
Press and hold
Remote Start
for
approx. 3 seconds.
2.
Set the programme to position 6.
→
"Overview of Home Connect set-
a
UdP
appears on the display.
3.
Press
Start / Reload
.
a
The software update is installed.
a
If
End
is shown on the display, the
software update is installed.
Note:
The software update may take
several minutes. Do not switch off the
appliance while the software update is
in progress.
Connecting the appliance to
the energy manager
If you connect the appliance to the
smart energy system (energy man-
ager), you will optimise your energy
consumption. The appliance starts only
when your home photovoltaic system
can provide sufficient energy or the en-
ergy tariff is good.
Requirements
¡
The smart energy system (energy
manager) must use the EEBus Initiat-
ive communications standard.
¡
You have read about how to connect
your appliance to the smart energy
system (energy manager) in the in-
struction manual for the smart en-
ergy system (energy manager).
1.
Press and hold
Remote Start
for
approx. 3 seconds.
a
The display shows
Aut
.
2.
Set the programme to position 7.
→
"Overview of Home Connect set-
a
The display shows
EnG
.
3.
Press
Start / Reload
.
a
The appliance is connected to the
smart energy system (energy man-
ager).
a
If the appliance has connected to
the energy manager successfully,
the display shows
con
and .
Содержание WAV28MH9GB
Страница 52: ...en Cleaning and servicing 52 2 1 ...
Страница 65: ......
Страница 66: ......
Страница 67: ......