Bosch WAU28PH5NL, Руководство пользователя и инструкции по установке, Страница: 56 / 68

NLTroubleshooting
Malfunction
wrinkling.
Cause and Troubleshooting
Unsuitable program set for the type of fabric.
▶
Select a suitable program for the type of fabric.
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Low spin speed is set.
▶
Set a higher spin speed for the next wash.
▶
Start the programCentrifuge .
is activated.
▶
Select a suitable program for the type of fabric.
Drain pipe or water drain hose is clogged.
▶
Clean the drain pipe and the water drain hose.
Drain pipe or water drain hose is kinked or
pinched.
▶
Make sure that the drain pipe and the water
drain hose are not kinked or pinched.
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the programCentrifuge .
Unbalance control system compensates for
imbalance through reduced spin speed.
▶
Redistribute the laundry in the drum.
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the programCentrifuge .
Detergent residue on
the damp laundry.
Detergents may contain water-insoluble substances,
which deposit on the laundry.
▶
Start the programTo rinse .
Unsuitable detergent has been placed in the dosing
container of the intelligent dosing system.
1.
Check whether the detergent used is suitable.
→
†Detergent and care agent", Page 33
56