![Bosch WAT28402UC Скачать руководство пользователя страница 22](http://html.mh-extra.com/html/bosch/wat28402uc/wat28402uc_use-and-care-manual-installation-instructions_52205022.webp)
22
Removing laundry/switching the
appliance off
1.
Open the front door of the washer and remove the
laundry.
2.
Turn the cycle selector to the
Off
position. Appliance is
switched off.
3.
Turn off the water tap.
NOTICES
▯
Do not leave any laundry in the drum. It can shrink or
become discolored by the next laundry.
▯
Remove any remaining items from the drum and
rubber gasket.
▯
Leave the front door and detergent drawer open so
that any remaining water can dry.
▯
Always wait for the end of the cycle; otherwise the
appliance may still be locked. If locked, switch the
appliance on and wait until it unlocks.
▯
If at the end of the cycle the display is not lit up, the
energy saving mode is active. To see display, press
any button.
Signal
You can change the following settings:
▯
volume for button signals
▯
volume for indicator signals
To change these settings always activate adjustment
mode first.
Activate adjustment mode
1.
Select
Cotton Normal
on Position 1.
The appliance is on.
2.
Hold down
Start Pause
and turn the Program Selector
to the right (Position 2). Release
Start Pause
button.
Adjustment mode is now activated and the default
volume for indicator signals appears in the display.
Changing the volume
You can set the volume by touching the
Finish in
button
with the program selector in one of the following
positions:
▯
Position 2: for indicator volume
▯
Position 3: for button signals volume
Quit adjustment mode
Turn the Cycle Selector to
Off
position. The settings were
saved.
2II
0 = off, 1 = soft,
2 = mid, 3 = loud,
4 = very loud
Содержание WAT28402UC
Страница 1: ...en us Use and Care Manual Installation Instructions Washer WAT28402UC ...
Страница 37: ......
Страница 38: ......
Страница 39: ......