en
Transportation, storage and disposal
58
3.
Insert all screws into the four
transit bolts and tighten slightly.
4.
Insert the power cord into the
holder and tighten all four
screws for the transit bolts with a
WAF 13 wrench .
5.
Insert the hose into holder.
18.3 Using the appliance
again
1.
Remove the transit bolts.
2.
Pour approx. 1 litre of water into
compartment II in the detergent
drawer.
3.
Start the
Drain
programme.
a
The unused detergent cannot flow
straight into the outlet during the
next wash.
18.4 Disposing of old appli-
ance
Valuable raw materials can be re-
used by recycling.
WARNING
Risk of harm to health!
Children can lock themselves in the
appliance, thereby putting their lives
at risk.
▶
Do not install the appliance behind
a door as this may obstruct the ap-
pliance door or prevent it from
opening.
▶
With redundant appliances, unplug
the power cord. Then cut through
the cord and damage the lock on
the appliance door beyond repair
so that the appliance door will no
longer close.
1.
Unplug the appliance from the
mains.
2.
Cut through the power cord.
3.
Dispose of the appliance in an en-
vironmentally friendly manner.
Information about current disposal
methods are available from your
specialist dealer or local authority.
This appliance is la-
belled in accordance
with European Directive
2012/19/EU concerning
used electrical and elec-