Troubleshooting
en
37
Fault
Cause and troubleshooting
"E:30/-20"
▶
Do not add any extra water to the appliance while it
is operating.
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The programme does
not start.
You have not pressed
Start / Reload
.
▶
Press
Start / Reload
.
Door is not closed.
1.
Close the door.
2.
Press
Start / Reload
to start the programme.
Childproof lock is activated.
▶
"Deactivating the childproof lock", Page 31
Finished in
is activated.
▶
Check whether
Finished in
is activated.
Laundry is caught in the door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
Start / Reload
to start the programme.
The door cannot
be opened.
– –– is activated.
▶
Continue the programme by selecting
Spin
or
Drain
and pressing
Start / Reload
.
"Resuming the programme when the programme
status is Rinse Hold", Page 30
The temperature is too high.
▶
Wait until the temperature has dropped.
▶
"Cancelling the programme", Page 30
Water level is too high.
▶
Select a suitable programme for draining.
→
Power failure.
▶
Open the door using the emergency release.
→
Содержание WAN24122AU
Страница 47: ......