Bosch WAL28PHVZA, Руководство пользователя и инструкции по установке

Страница: 41 / 68

Basic operation
en
41
4.
Push in the detergent drawer.
13.9 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press .
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a If you start a programme with act-
ive oxygen, the drum lights up
after the programme starts and the
mist that is created can be seen.
13.10 Adding laundry
Notes
¡
Observe the information on safety
→
Page 4 and preventing material
damage → Page 11 .
¡
If you a start a programme with
active oxygen, you cannot add any
laundry after the programme has
started.
1.
Press .
The appliance pauses.
Note:
If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press .
13.11 Cancelling the pro-
gramme
Note:
Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11 .
1.
Press .
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the ⁠
Rinse
programme.
– If the water level is high, start
the
Spin
programme or select
a suitable programme for drain-
ing.
→
"Programmes", Page 26
3.
Remove the laundry → Page 41 .
13.12 Unloading the laundry
Note:
Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11 .
1.
Open the appliance door.
2.
Remove the laundry.
13.13 Switching off the appli-
ance
1.
Press .
2.
Turn off the tap.