Bosch WAK20200IR, Инструкция по эксплуатации и руководство по установке

Страница: 23 / 40

Setting the signal
en
23
M
Setting the signal
Setting the signal
1. Activate the setting mode for the signal volume
Set to
Ú
. Press and hold the
0
button
and
turn one
position to the right.
Press and hold the button for approx.
five seconds until the display elements
light up. Setting mode is activated.
2. Set the volume for the button signals (depending on the model)
Press the button repeatedly until the desired
volume is reached.
Go to point
3 or
Set to
Ú
to exit the setting mode for the sig-
nal volume.
3. Set the volume for the information signals
Turn the dial one position
to the right.
Press the button repeatedly
until the desired volume is
reached.
Set to
Ú
to exit the setting mode for the signal
volume.