5
6
$
ay
c
$
c
=
>
$
$
m
a
$
$
a
a
ä
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
L
L
ć
a
a
L
7
/
@
2
c
=
>
:
/
÷
I
(
a
a
$
~
0
ʋ
ʋ
ʋ
Individual settings
ʑ
Ready in options button
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The Ready in- time can be set in
increments of one hour up to a maximum of 24 hours. Press the
Ready in
button
repeatedly until the required number of hours is displayed (h = hour). Choose
$
Start
/
Reload. It is not possible to make adjustments once the programme has started.
ʑ
c
Spin / without final spin
Before and while the selected programme is running, you can set the spin speed or
Rinse
Hold
(without final spin, laundry soaks in the last rinsing water, display panel - - -). The effects
depend on the programme progress. The maximum selectable spin speed depends on the
model and on which programme is currently selected.
ʑ
Additional functions
a
and overview of programmes, see
page 7.
Ĉ
SpeedPerfect
For washing in a shorter time with a washing outcome comparable to
that of the standard programme. Maximum load
a
Overview of
programmes,
page 7.
ć
EcoPerfect
For saving energy with a washing performance comparable to that of
the standard programme.
S
Reduced Ironing
Special spin sequence with subsequent fluffing. More gentle final spin
- residual moisture in the laundry slightly increased.
=
Aqua Plus
Increased water level and additional rinse cycle, extended washing
time. For areas with very soft water or for further enhancing the spin
result.
ʑ
Childproof lock and reloading
(
Childproof lock/
Appliance lock
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
ON /OFF
: Press and hold the
$
Start/Reload button for approx. 5
seconds after the start/end of the programme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switching off the machine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once the programme
has started.
YES
Reload
If you want to add additional items of laundry after the programme has
started, choose
$
Start/
Reload
. The machine checks whether
reloading is possible.
YES
is lit: Reloading is possible.
NO
flashes: wait until
YES
lights up.
Note: do not open the door until
YES
is lit.
NO
: It is not possible to reload.
Note: For safety reasons, the washing machine door remains locked
when the water level and/or temperature is high, or during spinning.
To continue the programme, press the
$
Start/
Reload.
ʑ
$
Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
Individual settings
ʑ
Signal
Important information
Protecting the laundry and the machine
When determining the dosage of all washing powders, additives and cleaning agents, you
must follow the manufacturer's instructions.
Empty pockets.
Look out for metal items (paperclips, etc.).
Wash delicates in a laundry bag (tights, curtains, underwired bras).
Fasten zips, do up any buttons.
Brush sand out of pockets and collars.
Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light
Do not pre-wash. If required, choose the additional function
Ĉ
SpeedPerfect
.
Pre-treat any stains as necessary.
intense
Do not load as much laundry.
Choose a programme with pre-wash.
Soaking
Load laundry of the same colour
Pour soaking agent/detergent into compartment
II
in accordance with the manufacturer's
instructions. Turn the programme selector to
L
Cottons 30 °C
and press
$
Start/
Reload.
After approx. 10 minutes, press
$
Start/
Reload
to pause the programme. Once the required
soaking time has elapsed, press
$
Start/
Reload again to continue the programme, or select
a different programme.
Starching
Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in
accordance with the manufacturer's instructions into fabric softener compartment
~
(rinse first
if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions! Do
not
use the washing machine for
bleaching clothes!
2.
Setting the volume
for ...
1.
Activating the mode
for setting the signal
volume
Set to
1 step, the
display panel
lights up
press and hold
+
1 step, release
Button signals
Information signals
Set to
Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to select
the function several times.
1200
1000
800
600
Rinse Hold
ü
(
1
üü
2
üü
g.
>
d.
$
nt
a
on
