VOT-320
Configuration using a Web browser | en
79
Bosch Sicherheitssysteme GmbH
Installation and Operating Manual
DOC | V4.5 | 2010.09
SSL certificate
To be able to work with an SSL encrypted data connection, both ends of a connection must
hold the relevant certificates. You can upload the SSL certificate, comprising one or multiple
files, onto the VOT-320.
If you wish to upload multiple files onto the VOT-320, you must select them consecutively.
1.
Enter the full path of the file to upload or click
Browse
to select the required file.
2.
Next, click
Upload
to begin transferring the file to the camera.
3.
Once all files have been successfully uploaded, the camera must be rebooted. In the
address bar of your browser, enter
/reset
after the IP address of the VOT-320 (for
example
192.168.0.10/reset
).
The new SSL certificate is valid.
Maintenance log
You can download an internal maintenance log from the camera to send it to Customer
Service for support purposes. When doing this, ensure that
HTTPS browser port
is not set to
Off
and TLS 1.0-support is activated for your browser (see
Section HTTPS browser port,
page 71
). Click
Download
and select a storage location for the file.
5.40
Advanced Mode: Licenses
You can enter the activation key to release additional functions or software modules.
NOTICE!
The certificate must be created in the format *.pem so that it can be accepted by the camera.
NOTICE!
The activation key cannot be deactivated again and is not transferable to other cameras.
Содержание VOT-320
Страница 1: ...VOT 320 VOT 320V0xxx en Installation and Operating Manual ...
Страница 2: ......
Страница 114: ...114 en Index VOT 320 DOC V4 5 2010 09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH ...
Страница 115: ......