1 697 090 700
2014-04-10
|
Robert Bosch GmbH
14 | VLS 5235 | Operation
en
6.6
Operation instructions
DANGER – Risk of vehicle falling or tipping!
Risk of (fatal) injury when lifting (or raising) the
runway.
¶
Make sure that the vehicle is correctly
positioned and secured against rolling.
¶
Make sure that there are no persons in
the vehicle or in the vicinity of the lifting
platform.
¶
Keep a safe distance from the lifting
platform.
¶
Observe the lifting platform and vehicle.
¶
Make sure that both runways lower evenly
when setting down in the setting-down
position.
6.6.1
Raise vehicle using the Runways
1.
Drive and park the vehicle midway between two
platforms. Make sure
the vehicle is correctly
positioned and secured against rolling
.
2.
Turn the optional
switch on the control panel to
“
Lifting platform
” and the switches in the control
unit to “working” and “infrared on”.
3.
Push the “
UP
” button on the control panel to lift the
vehicle a bit higher from the ground and check again
if the vehicle is in a safe position.
4.
Having raised the vehicle to the height needed, push
the “
Safety Lock
” button to ensure the mechanical
safety lock is engaged. Press the “
Emergency Stop
”
and check again the stability before performing
maintenance or repair work.
6.6.2
Lower vehicle
1.
Switch on.
2.
Press ”
DOWN I
” button to lower the lift. It will stop
lowering when clearance between the platforms and
the ground reaches to 500mm.
3.
Press “
DOWN II
” button to continue lowering the
platforms. Alarming buzz will be heard.