Bosch VIP X1, Инструкция по установке и эксплуатации

Страница: 85 / 104

VIP X1/VIP X2 | Installation and User Guide EN | 85
Bosch Security Systems | 2005-05 | V1.0 Operation
Connect on alarm
With the appropriate configuration, a connection between a transmitter and a
receiver is established automatically when an alarm is triggered (see page 61).
After a short time, the live video image from the transmitter will be shown on the
connected monitor.
This connection option can also be used to connect a transmitter and a
compatible receiver using a switch connected to the alarm input. In this case, no
computer is needed to establish the connection.
Connecting with a terminal program
Various requirements must be met in order to operate using a terminal program
(see page 21).
– Start the terminal program and enter the command
1
in the main menu to
switch to the IP menu.
– Enter the command
4
in the IP menu to change the remote IP address, then
enter the IP address of the device to connect to.
– Enter the command
0
to return to the main menu and then enter the
command
4
to switch to the Rcp+ menu.
– Enter the command
5
in the Rcp+ menu to activate the automatic connection.
Connecting with a Web browser
Various requirements must be met in order to operate using a Web program
(see page 25).
Note
Transmitter and receiver must be located in the same subnet to establish
a hardware connection with a Web browser (see pages 41 and 55).
– Use the Web browser to connect to the receiver. Its home page will be
displayed.
– Under Video sources on the page CONNECTIONS , select the VIP X. A
JPEG snapshot of the video source selected will be displayed on the page.
– If you are using a VIP X2, select the video input you want the images to come
from.
– Click MPEG-4 connection to begin displaying the video images on the
connected monitor.