Bosch VideoJet X10, Инструкция по установке и эксплуатации

Страница: 99 / 132

VideoJet X10 Operation | en 99
Bosch Security Systems Installation and Operating Manual V3.0 | 2007.09
6.2.7 System Log / Event Log
The System Log field contains information about the operating status of the VideoJet X10 and
the connection. You can save these messages automatically in a file (see
Abschnitt 5.32 Livepage Configuration , Seite 86).
Events such as the triggering or end of alarms are shown in the Event Log field. You can save
these messages automatically in a file (see Abschnitt 5.32 Livepage Configuration , Seite 86).
You can delete the entries from the fields. To do this, click the icon in the top right-hand
corner of the relevant field.
6.2.8 Audio Function
Depending on the configuration, the VideoJet X10 can send and receive audio signals. All
users who are connected by browsers receive the audio signals sent by the VideoJet X10.
Only the user who first connected to the VideoJet X10 can send audio signals to the unit.
1.
On the LIVEPAGE , click anywhere next to the video image to remove the focus from the
ActiveX.
2. Press and hold the F12 key to establish a voice connection with the VideoJet X10. The
browser's status bar displays the message Send Audio ON .
3. Release the F12 key if you no longer wish to send audio signals to the VideoJet X10. The
status bar in Internet Explorer displays the message Send Audio OFF .
i
NOTICE!
When the connection maintaining voice contact with the VideoJet X10 is broken, the next user
to connect to the VideoJet X10 can transmit the audio data to the VideoJet X10.