Bosch VideoJet X10 SN, Инструкция по установке и эксплуатации

Страница: 69 / 124

VideoJet X10 SN Configuration Using a Web Browser | en 69
Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06
Trigger active
Select the VCA configuration here that is to be enabled via an active trigger. A green check
mark to the right of the list field indicates that the trigger is active.
Trigger inactive
Select the VCA configuration here that is to be activated if the trigger is not active. A green
check mark to the right of the list field indicates that the trigger is inactive.
Delay (s)
Select the delay period here for the reaction of the video content analysis to trigger signals. A
delay period may be useful in avoiding false alarms or frequent triggering, for example. During
the delay period, the Silent configuration is always enabled.
5.32 Advanced Mode: Audio Alarm
The VideoJet X10 SN can create alarms on the basis of audio signals. You can configure signal
strengths and frequency ranges in such a way that false alarms, for example due to machine
noise or background noise, are avoided.
Audio alarm
Select On if you want the device to generate audio alarms.
i
NOTICE!
First set up normal audio transmission before you configure the audio alarm here (see
Section 5.20 Advanced Mode: Audio, page 49 ).