Bosch UML-323-90, Руководство пользователя

Страница: 23 / 41

Bosch High Performance HD LED Monitors Installing the Monitor | en 23
Bosch Security Systems, Inc. User's Manual F.01U.134.499 | 2.0 | 2012.10
5.6 Connecting the Y/C (S-Video) Signal to the Monitor
There is one (1) mini-DIN type connector for the S-Video (Y/C) input (refer to Section 3.2 Rear
Panels, page 14 ) on the rear side panel.
Note : Both Y and C inputs are terminated with 75 Ohm.
Figure 5.4 Y/C Connector pin-out
5.7 Connecting Audio to the Monitor
There are three (3) set of stereo audio connectors for audio inputs, located on the rear
panel.This audio inputs are not associated with any input terminals on the rear panel, and can
be freely connected to any audio input.
5.8 Connecting the PC Signal to the Monitor
There are three ways to connect the PC signal to the monitor: HDMI, DVI, and VGA.
5.8.1 HDMI Connection
The monitor can be connected to the HDMI (High Definition Multimedia Input) by connecting
a HDMI cable (not supplied).
Figure 5.5 HDMI Input
5.8.2 DVI Connection
The monitor can be connected by using the supplied DVI-D cable and connecting it to the
digital DVI-D signal.
Figure 5.6 DVI Input
Number Input
1 Ground
2 Ground
3 Y-signal
4 C-signal