Bosch UML-172, Руководство по установке

Страница: 41 / 52

High Performance LCD Monitors Navigating the Monitor | en 37
Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03
5.7.1 Configuring Alarm Relay Inputs
The monitor allows you to connect an alarm relay cable from a
device (camera or door) to the monitor, and then to configure
the monitor’s response to an incoming alarm (see
Section 4.7 Connecting an Alarm Trigger, Page 25 ).
Table 5.7 Trigger Menu
i
NOTICE! When key lock is enabled through the front panel, use
either the remote control or the front panel buttons to disable
the key lock command. To disable the key lock feature using the
front panel buttons, press and hold both the Input and the
Menu buttons until the monitor displays the Key Unlocked
message.
Trigger Enable Off
Trigger Type External
Trigger Input AV1
Buzzer On
Trigger Time 20
Trigger Option N/O
Display Type PIP & FULL
:Move :Input :Menu
Trigger
Option Definition Selections
Trigger Enable Activates the trigger feature. ON or OFF
Trigger Type Specifies the source of the alarm. This option is
always set to External.
External