Bosch UML-150-90, Руководство пользователя

Страница: 20 / 32

16 en | Navigating the Monitor General Purpose LCD Monitors
F.01U.078.454 | 1.0 | 2008.03 User’s Manual Bosch Security Systems, Inc.
6 Navigating the Monitor
6.1 Navigating the Front Panel
Use the front panel to make any necessary OSD adjustments to the UML-150-90, UML-170-90,
or the UML-190-90. See the figure below for an explanation of the front panel.
Figure 6.1 Front Panel Buttons
6.2 Navigating the Monitor On-screen Display (OSD)
The UML-150-90, UML-170-90, and the UML-190-90 have two (2) modes: Video and VGA. The
LCD is programmed through the on-screen display (OSD) menus and submenus where an
operator can select operating parameters. To access the OSD menus, press the Menu button.
Use the front panel of the monitor to make any necessary adjustments to the OSD.
To navigate the set up menus, follow the steps below:
1. Connect the CVBS or VGA cable.
2. If required, press the Input button until a signal is displayed. NOTE: Menus are not
available without a signal applied.
3. Press the Power button to turn on the unit (see Figure 3.1 ).
4. Press the Menu button to activate the main menu selections (see Figure 3.1 ).
5. Press the
S
and the
T
buttons to select a main menu.
6. Press the Menu button to enter a selected menu.
Reference # Button Description
1 Input Button Selects the signal to be displayed. Choices are: PC,
AV1, AV2, or S-Video.
2 Menu Button Selects the on-screen display (OSD).
3
S
Adjusts the value when in
the OSD.
Scrolls up in the OSD.
4
T
Adjusts the value when in
the OSD or auto adjusts
when in PC mode.
Scrolls down in the OSD.
5
W
Decreases the value when
in the OSD.
Scrolls left in the OSD.
6
X
Increases the value when
in the OSD.
Scrolls right in the OSD.
7 Not Used
8 Power Button / LED
Indicator
Power On (green)
Standby (amber)
Unsupported Mode (green)
Power Off (red)