English |
7
Bosch Power Tools
1 609 929 X83 | (29.11.10)
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only
: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions.
Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling
in wood, metal and plastic. Machines with elec-
tronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1
Key type drill chuck
2
“Drilling/Impact Drilling” selector switch
3
Lock-on button for On/Off switch
4
On/Off switch
5
Rotational direction switch
6
Wing bolt for depth stop adjustment
7
Wing bolt for adjustment of auxiliary handle
8
Auxiliary handle (insulated gripping surface)
9
Depth stop
10
Handle (insulated gripping surface)
11
Chuck key
12
Screwdriver bit*
13
Universal bit holder*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Assembly
f
Before any work on the machine itself, pull
the mains plug.
Auxiliary Handle (see figure A)
f
Operate your machine only with the auxilia-
ry handle 8.
The auxiliary handle
8
can be set to any position
for a secure and low-fatigue working posture.
Turn the wing bolt for adjustment of the auxilia-
ry handle
7
in anticlockwise direction and set
the auxiliary handle
8
to the required position.
Then tighten the wing bolt
7
again in clockwise
direction.
Impact Drill
TSB 1300
Professional
Article number
3 601 AA1 0..
Rated power input
W
550
Output power
W
270
No-load speed
min
-1
0 – 2700
Impact frequency at
no-load
min
-1
0 – 41600
Rated torque
Nm
1.5
Right/left rotation
z
Spindle collar dia.
mm
43
Max. drilling dia.
– Brickwork
– Concrete
– Steel
– Wood
mm
mm
mm
mm
13
13
10
25
Chuck clamping range
mm
1.5 – 13
Weight according to
EPTA-Procedure
01/2003
kg
1.8
Protection class
/
II
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
OBJ_BUCH-1381-001.book Page 7 Monday, November 29, 2010 1:18 PM
