Bosch TES 506 Series, Инструкция по эксплуатации

Страница: 42 / 94

38
Robert Bosch Hausgeräte GmbH
en
Cleaning
Duration: approx. 10 minutes.
Important: Clean the brewing unit before
starting the service programme, see chapter
“Cleaning the brewing unit”.
If the message
Clean required!
appears
on the display, press the
e
off /
j
button
(13) for 3 seconds and then press the start
button (10).
The cleaning programme will start.
To clean the appliance before being
prompted, press the
e
off /
j
button (13) for
at least 3 seconds. Then press the
e
off /
j
button (13) briely twice. Turn the upper
rotary knob (15) until Start cleaning
appears in the display. To start the cleaning
procedure, press the
start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
●
Empty drip tray (8) and replace them.
Cleaning in progress
The appliance rinses twice.
Open drawer
●
Open the drawer (4).
Fill cleaner
●
Drop a Bosch cleaning tablet in the
drawer (4)
and close.
Cleaning in progress
The cleaning pro gramme will now run for
about 8 minutes.
Empty drip tray
Insert drip tray
●
Empty drip tray (8) and replace them.
The appliance has inished cleaning is
ready for use again.
Calc‘n‘Clean
Duration: approx. 35 minutes.
Calc‘n‘Clean combines the separate
functions of descaling and cleaning. If both
programmes are due to be run soon, the
espresso machine automatically suggests
this service programme.
Important:
If there is a ilter in the water
tank (17), it needs to be removed before
the service programme is run. Clean the
brewing unit before starting the service
programme, see chapter “Cleaning the
brewing unit”.
If the message Calc‘n‘Clean required!
appears on the display, press the
e
off /
j
button (13) for 3 seconds and then
press the
start button (10). The service
programme will start.
To run Calc‘n‘Clean before being prompted,
press the
e
off /
j
button (13) for at
least 3 seconds. Then press the
e
off /
j
button (13) briely twice. Turn the upper
rotary knob (15) until Start Calc‘n‘Clean
appears in the display. To start
Calc‘n‘Clean, press the
start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
●
Empty drip tray (8) and replace them.
Calc‘n‘Clean in progress
The appliance rinses twice.
Open drawer
●
Open the drawer (4).
Fill cleaner
●
Drop a Bosch cleaning tablet in the
drawer (4)
and close.
N.B.:
If the water ilter is activated, the
display will prompt you to remove the ilter
and then press the start button (10) again.