Bosch TCE 260, Руководство по эксплуатации

Страница: 5 / 44

Outline | TCE 260 | 5 en
1 987 AT7 374 2015-09-02
|
Robert Bosch GmbH
1. Outline
1.1 General provision
1. This instruction is essential part for products. Please
carefully read the warnings and instructions inclu-
ded in manual before operation which also provide
important information regarding safety usage and
maintenance.
2. Properly keep this manual for the reference in the
future.
3. Careful reading the manual to make the operator use
the machine correctly, the dealer will provide long-
term and effective after-sales services. The producer
and dealers will not be responsible for the problems
caused by any incorrect operation.
4. Notes included in this manual:
R
Danger: The process can directly cause the serious
damage or death.
R
Warning: The unsafely process maybe cause the ligh-
ty or serious damage.
R
Note: The unsafely process can cause the serious
damage or death.
5. Before connect the power supply and air supply,
please carefully read the manual. Keep the operation
notes and warning notes on the manual and machi-
ne. The related information and data in the sales
process should be carefully kept. Different machine
will be equipped with different instruction manual.
The operators should pay attention to the effectiven-
ess of the manual.
Danger
You must use the machine in accordance with the requi-
rements specified in the manual. The manufacturer and
dealers won’t be responsible for the problems caused
by any incorrect operations.
Warning
The machine must be operated by the professional
personnel. The operator must be fully understand the
manual and received the professional training. If the
nonprofessional personnel operate the machine, which
maby because the personal dangerous and also lead to
the damage to the tire and rim.
Notes
The pictures in the manual all comes from the original
design structure of the machine. The structure shown
may be different from the actual structure of the machi-
ne.
The machine is made for the purpose to give guidance
to the personnel with some basis of mechanical and
electrical skills. Therefore, the basic processes such
as how to fix the bolts may be omitted. Do not try to
letting the personnel without experience operate the
machine. If you have any requirement related to this,
please ask the dealer to provide the help.
1.2 Technical Parameter
1. Overall dimension
Overall dimension
Length A=1120mm
Max. length A1=1740mm
Width B=1050mm
Max. width during
operation process
B1=1550mm
Min. height H=1710mm
Max. heigt H1=2170mm
Applicable wheels: standard tire, reverse tire, tire without center
hole, run flat tire.
2. Range of application
!
This machine is applicable for following range of
wheels:
Range of wheels
Outside clamp 10"~22"
Inside clamp 12"~26"
Max. tire diameter 1050mm
Max. tire width 13"
3. Turntable styple
Turntable style
Plying-up style Jaw
Fix style Jaw
Clamping style Pneumatic
Drive style Motor
Torque force 1100Nm
Turntable rotation speed 6rpm