26
Robert Bosch Hausgeräte GmbH
en
►
Holding it over the sink, fill the filter
holder with fresh, cold water and let it
filter through.
►
Please repeat this procedure two to three
times.
►
Now place the filter holder with filter
cartridge back into the empty water tank
and fill the tank with water.
Activate!BRITA!Filter!cartridge!change!
indicator
For maximum filter performance and anti-
scale protection, the BRITA MAXTRA filter
cartridge must be replaced every 8 weeks.
To ensure this is done, the cover of the
water tank has a built-in BRITA MAXTRA
Filter cartridge change indicator. It tells you
by means of bars when the filter cartridge
should be replaced.
To activate the BRITA Filter cartridge
change indicator, please press and hold the
start button until the four bars briefly light
up twice in the display area.
The blinking dot in the lower right corner
tells you that the Filter cartridge change
indicator is working. All four bars should be
visible.
Every second week from now on, one bar
will disappear. If no bars are visible after
eight weeks and the arrow is blinking,
please replace the filter cartridge. To
remove the filter cartridge, pull it upwards
on its strap.
When preparing to use a new filter
cartridge, please proceed as described
in the section “BRITA MAXTRA water
filtration system” and reset the BRITA Filter
cartridge change indicator.
Your!!TASSIMO!machine!is!now!
ready!for!use.
Tip:
If only one bar is visible, please purchase a
new filter cartridge.
The BRITA MAXTRA cartridges may be
obtained from various retailers or directly
from your Bosch Service Center (please
find contact details on page 194).
2 - 3x