Bosch SRS2IKW04E, Руководство пользователя

Страница: 12 / 56

NL Set up and connect
s Other documents containing information
tie
s Mounting material
s Salt filling aid funnel
s Power cord
s Quick Guide
Waste water connection
Connect the appliance to a drain water
connection so that the contaminated
washing water can be drained.
Install waste water connection
Setting up and connecting the
device
1.
The necessary steps can be found in
the supplied installation manual.
You can install your under-counter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently install the device as
a free-standing device, you must
secure the device against tipping over,
e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to
the adjacent cupboards. .
2.
Connect the drain hose to the
connection nipple of the siphon
using the supplied parts.
3.
Make sure that the drain hose is
not kinked, crushed or tangled.
4.
Make sure that the water does not
flow out by a sealing cap in the
waste water connection.
1. "
Observe the safety instructions." →
Page 4
Drinking water connection
2. "
Observe the instructions for the
electrical connection."
→
Page 13
Connect the device to a drinking
water connection.
Install drinking water connection
Note
3.
Check the contents of the package
and the condition of the device.
s When you replace the device,
you can use a new water supply
hose.
4.
The required installation dimensions can be found
in the installation instructions.
5.
Level the appliance using the
adjustable feet.
1.
The necessary steps can be found in
the supplied installation manual.
Pay attention to a firm stand.
2.
Connect the device to the
drinking water connection using
the enclosed parts.
6. "
Install the waste water
connection." → Page 12
The "technical data"
→
Page 53 consider.
7. "
Install the drinking water
connection." → Page 12
3.
Make sure that the drinking water
connection is not kinked, crushed
or entangled.
8.
Connect the device to the
power.
12