Bosch SPV68U53UC, Руководство по эксплуатации

Страница: 18 / 52

16
Auto Power Off
To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be
adjusted from P:00 to P:02.
To change the setting:
1
Press the
[On/Off]
button.
2
Hold down the “A” button (see page 14) and press [Start] until the display indicates “ @ :0x” (x can
be any number).
3
Release both buttons.
4
Press the
“A”
button until the display indicates
“P:0x”
.
5
Press the “C” button until the display corresponds with your requirements.
P:00 = dishwasher does not turn off automatically
P:01 = dishwasher turns off automatically after 1 minute
P:02 = dishwasher turns off automatically after 120 minutes (2 hours)
6
Press
[Start]
to save the setting.
InfoLight® (model dependent)
An LED illuminates the floor to indicate the unit is running. If the appliance is installed at eye-level, the
LED is not visible.
To change the setting:
1
Press the
[On/Off]
button.
2
Hold down the “ A ” button (see page 14) and press [Start] until the display indicates “ @ :00 ”.
3
Release both buttons.
4
Press the “ A ” button until the display shows “ 1:01 ”.
5
Press the “ C ” button to switch between “ 1:01 ” = ON and “ 1:00 ” = OFF and press [Start] to save.
Aquastop® Leak Protection
Our AquaStop® system contains leaks through a precisely engineered tub and sensor system that works
with our solid molded base. If a leak has occurred, it shuts down operation and automatically pumps
out water to avoid contact with the floor. It works 24/7 and can turn itself on.