Bosch SPV68U53UC, Руководство по эксплуатации

Страница: 17 / 52

15
Start the dishwasher
1
Press the [On/Off] button.
2
Select a cycle and desired options and press
[Start]
.
Cancel a Cycle
1
Press and hold the [Start] button for approximately 3 seconds until the display reads “0:01” .
2
Wait about 1 minute while the dishwasher drains.
3
Press the [On/Off] button.
Interrupt a Cycle
1
Press the
[On/Off]
button to turn the unit off.
2
To resume the cycle, press the [On/Off] button.
Setting the Amount of Rinse Aid
The amount of rinse aid dispensed can be set from “r:00” to “r:06”.
To change the setting:
1
Press the [On/Off] button.
2
Hold down the “ A ” button (see page 14) and press [Start] until the display indicates “ H:00 ”.
3
Release both buttons.
4
Press the “ A ” button until the display shows “ r:04 ”.
5
Press the “ C ” button to select the desired setting.
“ r:00 ” = dispenser is OFF
“ r:01 ” = lowest setting
“ r:02 ” = low setting
“ r:03 ” = medium setting
“ r:04 ” = medium/high setting
“ r:05 ” = high setting
“ r:06 ” = highest setting
6
Press [Start] to save the setting.
Delay Start
You can delay the start of the cycle in one hour increments up to 24 hours.
To set delay start:
1
Press the [On/Off] button.
2
Press the [+] button until the display jumps to “ h:01 ”.
3
Press the [+] or [-] button until the displayed time corresponds with your requirements.
h:01 = 1 hour delay
h:24 = 24 hour delay
4
Press [Start] to activate delay start.
To cancel delay start:
1
Press the [+] or [-] button until “h:00” is indicated on the digital display.
2
Press and hold [Start] for 3 seconds to cancel the cycle. You may now start a new cycle.