Bosch SPS6ZMW35E, Инструкция по эксплуатации

Страница: 14 / 68

NLSet up and connect
†Dishwasher
†Instructions
†Assembly instructions
†Guarantee
†mounting material
†Power cord
†Quick guide
Waste water connection
Connect the appliance to a waste water
connection so that the contaminated
washing water can be drained.
Waste water connection
to install
Set up and connect the device 1.
The necessary steps can be found in
the supplied installation instructions.
You can install your undercounter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently install the appliance
as a free-standing appliance, you must
secure the appliance against tipping
over, e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to the
adjacent cupboards.
2.
Connect the drain hose to the
connection nipple of the siphon
using the supplied parts.
3.
Make sure that the drain hose is not
kinked, crushed or tangled.
4.
Make sure that the water does not
flow out by a plug in the waste
water connection.
1.
Observe the safety instructions.
Page 4
Drinking water connection
2.
Observe the instructions for the
electrical connection.
→ Page 15
Connect the device to a drinking
water connection.
3.
Check the contents of the package
and the condition of the device.
Drinking water connection
to install
4.
The required installation dimensions can be found
in the installation instructions.
NoteWhen you replace the
appliance, you must use a new water
supply hose.
5.
Level the appliance using the
adjustable feet.
1.
The necessary steps can be found in
the supplied installation instructions.
Pay attention to a firm position.
6.
Install the waste water connection.
Page 14
2.
Connect the device to the drinking
water connection using the
enclosed parts.
7.
Install the drinking water
connection.
Page 14
The technical data
→ Page 63consider.
8.
Connect the device to the
power.
3.
Make sure that the drinking water
connection is not kinked, crushed
or entangled.
14